Stump grinding is the most common and efficient method for removing stumps. It involves using a powerful machine, a stump grinder, to grind the stump and its roots into small chips. These machines come in various sizes, from small, walk-behind models suitable for homeowners tackling a single stump, to large, powerful machines mounted on trailers and used by professional tree services for clearing extensive areas.
The choice of stump grinding equipment depends largely on the size and number of stumps, as well as accessibility. For smaller stumps in easily accessible areas, a walk-behind grinder is often sufficient. These are maneuverable and relatively easy to operate, though they require some physical effort. For larger stumps or multiple stumps, especially in restricted access areas, a larger, tracked or wheeled grinder might be necessary. These machines are more powerful and can grind stumps more quickly, but they also require more skill and experience to operate safely and effectively.
There are two primary cutting methods employed by stump grinders: wheel-type and drum-type cutting systems. Wheel-type grinders utilize a rotating wheel with carbide teeth that chip away at the stump and roots. Drum-type grinders, on the other hand, use a rotating drum with fixed teeth that grind the stump down. Both are effective, but wheel-type grinders are generally preferred for larger stumps due to their higher cutting capacity.
Regardless of the method or equipment used, safety is paramount in stump grinding. Operators should always wear appropriate personal protective equipment, including safety glasses, hearing protection, and sturdy work boots. It's crucial to carefully inspect the area around the stump for any hidden obstacles, such as rocks or debris, that could damage the equipment or cause injury. Finally, following the manufacturer's instructions for operating the specific stump grinder is essential for safe and effective stump removal.
Several factors influence the cost of stump grinding, making it difficult to give a blanket price. One of the biggest is the size of the stump. Think of it like ordering a pizza – a small personal pan costs less than a large one. Similarly, a small stump will be significantly cheaper to grind than a massive one from a giant oak tree. Diameter is the usual measurement, and most companies charge by the inch.
Another important factor is the location of the stump. Is it easily accessible from the street, or will the grinder need to be hauled through your backyard, potentially navigating tight spaces or delicate landscaping? Accessibility impacts the time and labor involved, affecting the overall cost. A stump nestled amongst flowerbeds will likely cost more than one in an open field.
The type of wood also plays a role. Hardwoods like oak and maple are denser and take more time and effort to grind than softer woods like pine or fir. This translates to a higher price for harder woods. Similarly, stumps that are heavily decayed or intertwined with roots can present more of a challenge and increase the grinding time.
Finally, consider additional services. Do you want the resulting wood chips removed or left on site? Do you need the hole filled with topsoil and seeded? These extras will add to the overall cost. Some companies also charge extra for travel time, particularly if they're located a significant distance from your property.
Getting multiple quotes from reputable stump grinding companies is always a good idea. Be sure to be upfront about the stump's size, location, and any additional services you require so you can get an accurate estimate and avoid surprises.
So, that old oak finally gave up the ghost and now you're left with a stubborn stump staring you in the face. The question is: DIY stump grinding or call in the pros? It's a dilemma many homeowners face, and there's no one-size-fits-all answer.
Tackling stump grinding yourself can seem appealing, especially if you're on a tight budget. Renting a stump grinder can save you a few hundred dollars compared to hiring a professional. Plus, there's a certain satisfaction that comes with doing it yourself. However, before you jump in, consider the learning curve. Operating a stump grinder isn't like mowing the lawn. These machines are powerful and can be dangerous if mishandled. You'll need to learn how to operate it safely and effectively, which can take time and potentially lead to damage to your property if you're not careful. Renting the grinder also means transporting it to and from your home, which can be another logistical hurdle.
On the other hand, hiring a professional stump grinding service offers peace of mind. They have the experience, the right equipment, and the insurance to handle the job efficiently and safely. They'll assess the stump, grind it down below ground level, and clean up the mess, leaving you with a smooth surface ready for landscaping. This saves you time, effort, and potential headaches. Of course, this convenience comes at a price, and professional services can be more expensive than the DIY route.
Ultimately, the best choice depends on your individual circumstances. If you're handy, have the time, and are comfortable operating heavy machinery, DIY might be a viable option. But if you're short on time, prioritize safety, or have a particularly large or difficult stump, calling a professional is probably the smarter move. Weigh the pros and cons carefully before making a decision – it's worth it to avoid turning a simple stump removal into a bigger problem.
Post-grinding landscape restoration is a crucial final step after stump grinding or removal. It's easy to focus on the big job of getting rid of that pesky stump, but what you do afterward determines the long-term health and beauty of your yard. Think of it like surgery: removing the problem is only half the battle; proper aftercare is essential for complete healing.
Once the stump grinder has done its work, you're left with a hole filled with wood chips and possibly some exposed roots. This isn't exactly aesthetically pleasing, and it can also pose a tripping hazard. The first step in restoration is to clean up the debris. You can use the wood chips as mulch elsewhere in your garden or dispose of them according to local regulations. Any larger roots should be removed to prevent regrowth and create a level surface.
Next, you'll need to fill the hole. The best filling material depends on your plans for the area. If you intend to plant another tree, topsoil amended with compost is ideal. This provides the necessary nutrients for healthy root development. If you plan to lay sod or seed grass, a mix of topsoil and sand can create a suitable base. Ensure the filled area is slightly mounded, as it will settle over time.
Finally, the restored area needs to be integrated seamlessly with the surrounding landscape. This may involve seeding with grass, planting ground cover, or adding decorative elements like rocks or mulch. Watering the area regularly, especially during the first few weeks, is essential for establishing new growth and preventing the soil from compacting.
Proper post-grinding landscape restoration isn't just about aesthetics. It also prevents erosion, improves soil health, and minimizes the risk of future problems like tripping hazards and pest infestations. By taking the time to complete this final step, you ensure your yard remains healthy, vibrant, and enjoyable for years to come.
An arborist, or (less commonly) arboriculturist, is a professional in the practice of arboriculture, which is the cultivation, management, and study of individual trees, shrubs, vines, and other perennial woody plants in dendrology and horticulture.[citation needed]
Arborists generally focus on the health and safety of individual plants and trees, rather than managing forests or harvesting wood (silviculture or forestry). An arborist's scope of work is therefore distinct from that of either a forester or a logger.[citation needed]
In order for arborists to work near power wires, either additional training is required or they need to be certified as a Qualified Line Clearance Arborist or Utility Arborist (there may be different terminology for various countries). There is a variety of minimum distances that must be kept from power wires depending on voltage, however the common distance for low voltage lines in urban settings is 10 feet (about 3 metres).[1]
Arborists who climb (as not all do) can use a variety of techniques to ascend into the tree. The least invasive, and most popular technique used is to ascend on rope. There are two common methods of climbing, Single Rope System (SRS) and Moving Rope System (MRS). When personal safety is an issue, or the tree is being removed, arborists may use 'spikes', (also known as 'gaffs' or 'spurs') attached to their chainsaw boots with straps to ascend and work. Spikes wound the tree, leaving small holes where each step has been.[citation needed]
An arborist's work may involve very large and complex trees, or ecological communities and their abiotic components in the context of the landscape ecosystem. These may require monitoring and treatment to ensure they are healthy, safe, and suitable to property owners or community standards. This work may include some or all of the following: planting; transplanting; pruning; structural support; preventing, or diagnosing and treating phytopathology or parasitism; preventing or interrupting grazing or predation; installing lightning protection; and removing vegetation deemed as hazardous, an invasive species, a disease vector, or a weed.[citation needed]
Arborists may also plan, consult, write reports and give legal testimony. While some aspects of this work are done on the ground or in an office, much of it is done by arborists who perform tree services and who climb the trees with ropes, harnesses and other equipment. Lifts and cranes may be used too. The work of all arborists is not the same. Some may just provide a consulting service; others may perform climbing, pruning and planting: whilst others may provide a combination of all of these services.[2]
Arborists gain qualifications to practice arboriculture in a variety of ways and some arborists are more qualified than others. Experience working safely and effectively in and around trees is essential. Arborists tend to specialize in one or more disciplines of arboriculture, such as diagnosis and treatment of pests, diseases and nutritional deficiencies in trees, climbing and pruning, cabling and lightning protection, or consultation and report writing. All these disciplines are related to one another and some arborists are very well experienced in all areas of tree work, however not all arborists have the training or experience to properly practice every discipline.[citation needed]
Arborists choose to pursue formal certification, which is available in some countries and varies somewhat by location. An arborist who holds certification in one or more disciplines may be expected to participate in rigorous continuing education requirements to ensure constant improvement of skills and techniques.[citation needed]
In Australia, arboricultural education and training are streamlined countrywide through a multi-disciplinary vocational education, training, and qualification authority called the Australian Qualifications Framework, which offers varying levels of professional qualification. Government institutions including Technical and Further Education TAFE offer Certificate III or a diploma in arboriculture as well as some universities.[3][4] There are also many private institutions covering similar educational framework in each state. Recognition of prior learning is also an option for practicing arborists with 10 or more years of experience with no prior formal training. It allows them to be assessed and fast track their certification.[citation needed]
In France, a qualified arborist must hold a Management of Ornamental Trees certificate, and a qualified arborist climber must hold a Pruning and Care of Trees certificate; both delivered by the French Ministry of Agriculture.[5][6]
In the UK, an arborist can gain qualifications up to and including a master's degree. College-based courses include further education qualifications, such as national certificate, national diploma, while higher education courses in arboriculture include foundation degree, bachelor's degree and master's degree.[citation needed]
In the US, a Certified Arborist (CA) is a professional who has over three years of documented and verified experience and has passed a rigorous written test from the International Society of Arboriculture. Other designations include Municipal Specialist, Utility Specialist and Board Certified Master Arborist (BCMA). The USA and Canada additionally have college-based training which, if passed, will give the certificate of Qualified Arborist. The Qualified Arborist can then be used to offset partial experience towards the Certified Arborist.
Tree Risk Assessment Qualified credential (TRAQ), designed by the International Society of Arboriculture, was launched in 2013. At that time people holding the TRACE credential were transferred over to the TRAQ credential.[citation needed]
In Canada, there are provincially governed apprenticeship programs that allow arborists' to work near power lines upon completion. These apprenticeship programs must meet the provincial reregulations (For example, in B.C. they must meet WorkSafeBC G19.30), and individuals must ensure they meet the requirements of the owner of the power system.[citation needed]
Trees in urban landscape settings are often subject to disturbances, whether human or natural, both above and below ground. They may require care to improve their chances of survival following damage from either biotic or abiotic causes. Arborists can provide appropriate solutions, such as pruning trees for health and good structure, for aesthetic reasons, and to permit people to walk under them (a technique often referred to as "crown raising"), or to keep them away from wires, fences and buildings (a technique referred to as "crown reduction").[7] Timing and methods of treatment depend on the species of tree and the purpose of the work. To determine the best practices, a thorough knowledge of local species and environments is essential.[citation needed]
There can be a vast difference between the techniques and practices of professional arborists and those of inadequately trained tree workers. Some commonly offered "services" are considered unacceptable by modern arboricultural standards and may seriously damage, disfigure, weaken, or even kill trees. One such example is tree topping, lopping, or "hat-racking", where entire tops of trees or main stems are removed, generally by cross-cutting the main stem(s) or leaders, leaving large unsightly stubs. Trees that manage to survive such treatment are left prone to a spectrum of detrimental effects, including vigorous but weakly attached regrowth, pest susceptibility, pathogen intrusion, and internal decay.[8]
Pruning should only be done with a specific purpose in mind. Every cut is a wound, and every leaf lost is removal of photosynthetic potential. Proper pruning can be helpful in many ways, but should always be done with the minimum amount of live tissue removed.[9]
In recent years, research has proven that wound dressings such as paint, tar or other coverings are unnecessary and may harm trees. The coverings may encourage growth of decay-causing fungi. Proper pruning, by cutting through branches at the right location, can do more to limit decay than wound dressing [10]
Chemicals can be applied to trees for insect or disease control through soil application, stem injections or spraying. Compacted or disturbed soils can be improved in various ways.[citation needed]
Arborists can also assess trees to determine the health, structure, safety or feasibility within a landscape and in proximity to humans. Modern arboriculture has progressed in technology and sophistication from practices of the past. Many current practices are based on knowledge gained through recent research, including that of Alex Shigo, considered one "father" of modern arboriculture.[11]
Depending on the jurisdiction, there may be a number of legal issues surrounding the practices of arborists, including boundary issues, public safety issues, "heritage" trees of community value, and "neighbour" issues such as ownership, obstruction of views, impacts of roots crossing boundaries, nuisance problems, disease or insect quarantines, and safety of nearby trees or plants that may be affected.[citation needed]
Arborists are frequently consulted to establish the factual basis of disputes involving trees, or by private property owners seeking to avoid legal liability through the duty of care.[12] Arborists may be asked to assess the value of a tree[13] in the process of an insurance claim for trees damaged or destroyed,[14] or to recover damages resulting from tree theft or vandalism.[15] In cities with tree preservation orders an arborist's evaluation of tree hazard may be required before a property owner may remove a tree, or to assure the protection of trees in development plans and during construction operations. Carrying out work on protected trees and hedges is illegal without express permission from local authorities,[16] and can result in legal action including fines.[17] Homeowners who have entered into contracts with a Homeowner's association (see also Restrictive covenants) may need an arborists' professional opinion of a hazardous condition prior to removing a tree, or may be obligated to assure the protection of the views of neighboring properties prior to planting a tree or in the course of pruning.[18] Arborists may be consulted in forensic investigations where the evidence of a crime can be determined within the growth rings of a tree, for example. Arborists may be engaged by one member of a dispute in order to identify factual information about trees useful to that member of the dispute, or they can be engaged as an expert witness providing unbiased scientific knowledge in a court case. Homeowners associations seeking to write restrictive covenants, or legislative bodies seeking to write laws involving trees, may seek the counsel of arborists in order to avoid future difficulties.[19]
Before undertaking works in the UK, arborists have a legal responsibility to survey trees for wildlife, especially bats, which are given particular legal protection. In addition, any tree in the UK can be covered by a tree preservation order and it is illegal to conduct any work on a tree, including deadwooding or pruning, before permission has been sought from the local council.[citation needed]
The protagonist in Italo Calvino's novel The Baron in the Trees lives life on the ground as a boy and spends the rest of his life swinging from tree to tree in the Italian countryside. As a young man he helps the local fruit farmers by pruning their trees.[citation needed]
Some noteworthy arborists include:
Arboriculture (/ˈɑËÂÂÂrbÉ™rɪˌkÊŒltʃər, É‘ËÂÂÂrˈbÉâ€ÂÂËÂÂÂr-/)[1] is the cultivation, management, and study of individual trees, shrubs, vines, and other perennial woody plants. The science of arboriculture studies how these plants grow and respond to cultural practices and to their environment. The practice of arboriculture includes cultural techniques such as selection, planting, training, fertilization, pest and pathogen control, pruning, shaping, and removal.
A person who practices or studies arboriculture can be termed an arborist or an arboriculturist. A tree surgeon is more typically someone who is trained in the physical maintenance and manipulation of trees and therefore more a part of the arboriculture process rather than an arborist. Risk management, legal issues, and aesthetic considerations have come to play prominent roles in the practice of arboriculture. Businesses often need to hire arboriculturists to complete "tree hazard surveys" and generally manage the trees on-site to fulfill occupational safety and health obligations.[citation needed]
Arboriculture is primarily focused on individual woody plants and trees maintained for permanent landscape and amenity purposes, usually in gardens, parks or other populated settings, by arborists, for the enjoyment, protection, and benefit of people.[citation needed]
Arboricultural matters are also considered to be within the practice of urban forestry yet the clear and separate divisions are not distinct or discreet.[citation needed]
Tree benefits are the economic, ecological, social and aesthetic use, function purpose, or services of a tree (or group of trees), in its situational context in the landscape.
A tree defect is any feature, condition, or deformity of a tree that indicates weak structure or instability that could contribute to tree failure.
Common types of tree defects:
Codominant stems: two or more stems that grow upward from a single point of origin and compete with one another.
Included bark: bark is incorporated in the joint between two limbs, creating a weak attachment
Dead, diseased, or broken branches:
Cracks
Cavity and hollows: sunken or open areas wherein a tree has suffered injury followed by decay. Further indications include: fungal fruiting structures, insect or animal nests.
Lean: a lean of more than 40% from vertical presents a risk of tree failure
Taper: change in diameter over the length of trunks branches and roots
Epicormic branches (water sprouts in canopy or suckers from root system): often grow in response to major damage or excessive pruning
Roots:
Proper tree installation ensures the long-term viability of the tree and reduces the risk of tree failure.
Quality nursery stock must be used. There must be no visible damage or sign of disease. Ideally the tree should have good crown structure. A healthy root ball should not have circling roots and new fibrous roots should be present at the soil perimeter. Girdling or circling roots should be pruned out. Excess soil above the root flare should be removed immediately, since it presents a risk of disease ingress into the trunk.
Appropriate time of year to plant: generally fall or early spring in temperate regions of the northern hemisphere.
Planting hole: the planting hole should be 3 times the width of the root ball. The hole should be dug deep enough that when the root ball is placed on the substrate, the root flare is 3–5cm above the surrounding soil grade. If soil is left against the trunk, it may lead to bark, cambium and wood decay. Angular sides to the planting hole will encourage roots to grow radially from the trunk, rather than circling the planting hole. In urban settings, soil preparation may include the use of:
Tree wells: a zone of mulch can be installed around the tree trunk to: limit root zone competition (from turf or weeds), reduce soil compaction, improve soil structure, conserve moisture, and keep lawn equipment at a distance. No more than 5–10cm of mulch should be used to avoid suffocating the roots. Mulch must be kept approximately 20cm from the trunk to avoid burying the root flare. With city trees additional tree well preparation includes:
Tree grates/grill and frames: limit compaction on root zone and mechanical damage to roots and trunk
Root barriers: forces roots to grow down under surface asphalt/concrete/pavers to limit infrastructure damage from roots
Staking: newly planted, immature trees should be staked for one growing season to allow for the root system to establish. Staking for longer than one season should only be considered in situations where the root system has failed to establish sufficient structural support. Guy wires can be used for larger, newly planted trees. Care must be used to avoid stem girdling from the support system ties.
Irrigation: irrigation infrastructure may be installed to ensure a regular water supply throughout the lifetime of the tree. Wicking beds are an underground reservoir from which water is wicked into soil. Watering bags may be temporarily installed around tree stakes to provide water until the root system becomes established. Permeable paving allows for water infiltration in paved urban settings, such as parks and walkways.
Within the United Kingdom trees are considered as a material consideration within the town planning system and may be conserved as amenity landscape[2] features.
The role of the Arborist or Local Government Arboricultural Officer is likely to have a great effect on such matters. Identification of trees of high quality which may have extensive longevity is a key element in the preservation of trees.
Urban and rural trees may benefit from statutory protection under the Town and Country Planning[3] system. Such protection can result in the conservation and improvement of the urban forest as well as rural settlements.
Historically the profession divides into the operational and professional areas. These might be further subdivided into the private and public sectors. The profession is broadly considered as having one trade body known as the Arboricultural Association, although the Institute of Chartered Foresters offers a route for professional recognition and chartered arboriculturist status.
The qualifications associated with the industry range from vocational to Doctorate. Arboriculture is a comparatively young industry.